Figure 3-93. Static Addresses Page - Alcatel OS-LS-6224 User Manual

Command Attributes
• MAC Address — Displays the MAC address to which the entry refers.
• VLAN ID — Displays the VLAN ID number to which the entry refers.
• Interface — Displays the interface to which the entry refers:
• Port — The specific port number to which the forwarding database parameters
refer.
• LAG — The specific LAG number to which the forwarding database parameters
refer.
• Status — Displays how the entry was created. The possible field values are:
• Secure — The MAC Address is defined for locked ports.
• Permanent — The MAC address is permanent.
• Delete on Reset — The MAC address is deleted when the device is reset.
• Delete on Timeout — The MAC address is deleted when a timeout occurs.
• Remove — Removes the entry. The possible field values are:
• Checked — Removes the selected entry.
• Unchecked — Maintains the current static forwarding database.
Web – Click Layer 2, Address Table, Static Addresses. Specify the interface, the
MAC address and VLAN, then click Apply.
CLI – The following is an example of the CLI commands used to define static
addresses:
Console(config)# interface vlan 2
Console(config-if)# bridge address 3aa2.64b3.a245 ethernet 1/e16 permanent
4-319

Figure 3-93. Static Addresses Page

Defining the Forwarding Database
3
4-676
187