Initial Configuration
2
a password, it is recommended to always assign a password. If there is no specified
password, privileged users can access the Web interface with any password.
Configuring an Initial Console Password
To configure an initial console password, enter the following commands:
Console(config)#
Console(config)#
Console(config)#
Console(config-line)#
Console(config-line)#
Console(config-line)#
When initially logging on to a device through a console session, enter george at the
password prompt.
When changing a device's mode to enable, enter george at the password prompt.
Configuring an Initial Telnet Password
To configure an initial Telnet password, enter the following commands:
Console(config)#
Console(config)#
Console(config)#
Console(config-line)#
Console(config-line)#
Console(config-line)#
When initially logging onto a device through a Telnet session, enter bob at the
password prompt.
When changing a device mode to enable, enter bob.
Configuring an Initial SSH password
To configure an initial SSH password, enter the following commands:
Console(config)#
Console(config)#
Console(config)#
Console(config-line)#
Console(config-line)#
Console(config-line)#
When initially logging onto a device through a SSH session, enter jones at the
password prompt.
When changing a device mode to enable, enter jones.
24
aaa authentication login default line
aaa authentication enable default line
line console
login authentication default
enable authentication default
password
george
aaa authentication login default line
aaa authentication enable default line
line telnet
login authentication default
enable authentication default
password
bob
aaa authentication login default line
aaa authentication enable default line
line ssh
login authentication default
enable authentication default
password
jones
4-293
4-295
4-443
4-296
4-297
4-301
4-293
4-295
4-443
4-296
4-297
4-301
4-293
4-295
4-443
4-296
4-297
4-301