• Group ID – Defines the MAC based VLAN ID. The possible field range is 1 -
2147483647.
• Remove — If checked, deletes the MAC-Based VLAN Group.
Web – Click Layer 2, VLAN, VLAN Groups, MAC-based VLAN Groups. Define the
fields and click Apply.
CLI – The following is an example of the CLI commands used to create MAC Based
VLAN groups:
console(config)# vlan database
console(config-vlan)# map mac 00:08:78:32:98:78 9 macs-group 1 interface
ethernet e17
Configuring Subnet Based VLAN Groups
The Subnet-Based Groups Page contains information for defining Subnet Based
VLAN groups.
Command Attributes
• IP Address – Defines the IP address assigned to the VLAN group.
• Prefix – Defines the IP address's prefix. The possible field range is 1-32.
• Group ID – Defines the IP based VLAN ID. The possible field range is 1 -
2147483647.
• Remove — If checked, deletes the Subnet-Based VLAN Group.
Web – Click Layer 2, VLAN, VLAN Groups, Subnet-based Groups. Define the fields
and click Apply.
Figure 3-108. MAC-Based Groups Page
Defining VLAN Groups
4-674
4-380
3
213