Example
The following example limits logging messages displayed on the console to severity
level errors.
Console(config)# logging console errors
Related Commands
logging
show logging
logging buffered
The logging buffered Global Configuration mode command limits syslog messages
displayed from an internal buffer based on severity. To cancel using the buffer, use
the no form of this command.
Syntax
logging buffered level
no logging buffered
Parameters
• level — Specifies the severity level of messages logged in the buffer.
Possible values are: emergencies, alerts, critical, errors, warnings,
notifications, informational, debugging.
Default Setting
The default severity level is informational.
Command Mode
Global Configuration mode
Command Usage
All the syslog messages are logged to the internal buffer. This command limits
the messages displayed to the user.
Example
The following example limits syslog messages displayed from an internal buffer
based on severity level debugging.
Console(config)# logging buffered debugging
Related Commands
logging
clear logging
show logging
Syslog Commands
605
4