Configuring Multiple Hosts; Figure 3-73. Port Authentication Page - Alcatel OS-LS-6224 User Manual

3
Configuring the Switch
CLI – The following is an example of the Port Authentication CLI commands:
Console# dot1x re-authenticate ethernet 1/e16
Console(config)# interface ethernet 1/e16
Console(config-if)# dot1x port-control auto
Console(config-if)# dot1x re-authentication
Console(config-if)# dot1x timeout re-authperiod 300
Console(config-if)# dot1x timeout quiet-period 3600
Console(config-if)# dot1x timeout tx-period 3600
Console(config-if)# dot1x max-req 6
Console(config-if)# dot1x timeout supp-timeout 3600
Console(config-if)# dot1x timeout server-timeout 3600

Configuring Multiple Hosts

The Multiple Hosts Page allows network managers to configure advanced
port-based authentication settings for specific ports and VLANs.
Command Attributes
• Unit No. — Indicates the stacking member for which the Multiple Hosts information
is displayed.
• Port — Displays the port number for which advanced port-based authentication is
enabled.
• Host Authentication— Indicates the Host Authentication mode. The possible field
values are:
• Single Host Mode — Only the authorized host can access the port.
• Multiple Host Mode — Multiple hosts can be attached to a single
port. Only one host must be authorized for all hosts to access the network. If the
158

Figure 3-73. Port Authentication Page

4-272
4-380
4-271
4-272
4-273
4-274
4-275
4-276
4-277
4-278
802.1x-enabled