Parameters
• interface — Valid Ethernet port. (Full syntax: unit/port)
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Examples
The following examples display 802.1X advanced features for the device.
Switch# show dot1x advanced
Guest VLAN: 3978
Unauthenticated VLANs: 91,92
Port
---------
1/e1
1/e2
Switch# show dot1x advanced ethernet 1/e12
Port
---------
1/e12
Single host parameters
Violation action: Discard
Trap: Disabled
Trap frequency: 10
Status: Not in auto mode
Violations since last trap: 9
Multiple Hosts
--------------
Disabled
Enabled
Multiple Hosts
--------------
Disabled
Guest VLAN
----------
Enabled
Disabled
Guest VLAN
----------
Disabled
802.1x Commands
MAC
Authentication
---------------
MAC-and-802.1x
Disabled
MAC
Authentication
---------------
Disabled
291
4