Ip Router Tasks Links - Alcatel SpeedTouch 610 Orientation Manual

2 The SpeedTouch™610 Web Interface

2.3. IP Router Tasks Links

Static Routing
26
Clicking this button pops up the IP Address- and Routing Tables page.
This page allows to:
•
Overview or add/delete specific IP address entries for the SpeedTouch™610
interfaces:
You can add a static IP address for one of SpeedTouch™610's interfaces by
clicking New. Specify the IP address, (sub)netmask, whether NAPT should be
applied on this address or not, and select the interface for which the IP address
applies (use eth0 for the Ethernet interface). Click Apply to add the entry to the
table. All essential IP routes according to this IP address will be automatically
added to the SpeedTouch™610 IP routing table.
•
Overview or add/delete static IP routes for SpeedTouch™610's IP router:
Routing can be useful in the case of subnetting your local network. You can add a
static IP route by clicking New. Specify the destination IP address (use the prefix
notation to apply a subnetmask), source IP address, and specify the gateway IP
address or select the interface for this route. Click Apply to add the entry to the
table.
3EC 37770 AAAA TCZZA Ed. 02