Advertisement
4.2.2 How to stop (park)
When you depress the parking brake pedal, driving stops and the gear shift lever and
change pedal return to the neutral "N" position all at once, and then stop. However,
please make a habit of using the gear shift lever or change pedal to stop Driving
normally. Especially when the parking brake pedal is depressed or the foot is released
from the change pedal at high speeds, a sudden stop may cause a physical shock to
the operator and overload the vehicle body.
Throttle lever
Park the machine on a flat surface with no obstructions in the surroundings, and remove the
key switch to prevent theft.
︔
Reference
Be sure to use the engine switch to stop the engine.
If you lock the parking brake and move the cutting height adjustment lever to the "move" position,
the engine will not stop even if you stand up from the seat, but if you stand up from any other
position, the engine will stop for safety. (The pilot lamp does not go off and the engine switch is in
the "RUN" state. In this case, leaving it as it is may cause the battery to run down). Be sure to
return the parking brake and the cutting height adjustment lever to the moving position, and the
key to the "OFF" position.
After starting the engine, the engine will not stop if you are sitting on the seat regardless of the
positions of the parking brake pedal and the cutting height adjustment lever.
The drive system of this machine is hydraulically controlled on-demand four-wheel drive.
The hydraulic control automatically switches between the two-wheel drive state and the four-wheel
drive state, so there is no need for the operator to perform the switching operation.
The front wheels are not driven when the vehicle is running with a light load (flat land, etc.). (Two-
wheel drive state).
The front wheels are driven when driving under heavy load (hill, soft ground, etc.). (4 wheel drive
condition).
①
Stop the Driving.
②
Set the throttle lever to the "low speed" side to slow
down the engine rpm.
③
Stop the engine.
〈4.1.2Refer to How to stop the engine〉
Depress the parking brake pedal and "lock" with the
④
brake stopper to park.
- 27 -
7. 点検表
Advertisement
