Advertisement
1) If you want to check the engine oil after the engine is running, wait for "about 5 minutes
or more" after stopping the engine, and check the cooling condition of the muffler and
the engine itself.
2) Be sure to check the engine oil level before starting, as excessive or insufficient engine
oil may cause a malfunction.
3) The engine oil is of high quality above SF / SG / SH / SJ grade, use "10W-30" oil, and do
not use commercially oil additives.
4) After replenishing, securely tighten the oil gauge. If tightened loosely, engine oil may
leak out.
「Recommended oil」
3.2 Fuel inspection and refueling
Fuel gauge
① Set the horizontal, remove the filler cap and check the
amount of fuel from the filler.
② Refuel as soon as the fuel gauge approaches the
"E" position.
③
Do not put fuel above the middle of the filter.
It may cause fuel leakage on uneven roads and slopes.
The leaked fuel will be discharged to the front of the
Tank front
tank, but wipe out the spilled fuel.
④ After refueling, securely tighten the fuel filler cap.
※Fuel gauge is a guide. Keep the fuel up to the middle
of the filter and be careful not to overfill it. If it spills,
wipe it clean. Especially when using on sloping ground,
use below the bottom of the filter. Risk of fuel leakage
due to tilt.
〈Fuel used: Unleaded regular gasoline〉
- 21 -
Advertisement
