Advertisement
7.4.4 Battery failure and how to deal with it
phenomenon
Neglected to charge
Starter
does
not
Poor contact of terminal
turn
Battery life
Incomplete charging
The starter doesn't
run fast. The top of
Insufficient electrolyte
the electrode plate is
white when viewed
Battery
from the inlet hole
discharge)
Can't charge even
Battery life
if charged
Fuse blown
Corrosion
of
the
Poor contact of terminal
terminals is severe
and the terminals
Dirty terminal
become hot
The
cracked
Electrolyte
Charge voltage is too
decreases quickly
high
Battery life
※If you have any questions, please contact the dealer where you purchased the product.
Cause
Charging for a long time with
normal charging
Thoroughly wash and tighten
the terminal
Battery replacement
Charging for a long time with
normal charging
Recharge
distilled water
Charging for a long time with
overuse
(over
normal charging
Battery replacement
Fuse replacement
Wash the terminal well
and tighten it
battery
case
is
Battery replacement
Charger replacement
Battery replacement
treatment
Do
forcibly and charge it early.
Clean
tightly and apply grease
Fully charge before use
by
adding
Regularly check the liquid
volume
Do
forcibly and charge it early.
３０Ａ－１９Ｌ
２０Ａ
Clean the terminal and tighten
it firmly and apply grease.
Secure the installation
7. 点検表
Prevention method
not
use
the
battery
the
terminal,
tighten
not
use
the
battery
Advertisement
