Advertisement
5)
When replacing or installing / removing a knife / blade or tire / crawler, please make sure
that it is securely tightened in the specified location or firmly tightened.
6)
When replacing the knife / blade or tire / crawler with a new one, please replace the
mounting bolts together with a new one of the manufacturer genuine products for safety.
7)
It is dangerous to damage the safety cover of the belt and knife part and the cover for
preventing scattering. Please do not leave the part where you feel abnormality during
work, always interrupt the work, inspect again, please check again after work, please
make necessary repair
8)
Be sure to install the removed covers correctly in their original positions.
9)
Please do not set the attachments or modification which are not specified.
10) When the fuel pipe becomes old, it becomes a cause of fuel leakage and it is dangerous.
Replace it with a new one along with the tightening band each 3 year or when it gets
injured.
Failure to observe the following precautions may damage the machine.
1)
When washing the machine, please do not spray water on the engine part (electrical
parts, near the air cleaner, fuel cap etc.) and warning labels pasting place.
Check and adjust the clutches, throttle, gear change etc thoroughly.
2)
3) For in case of covering please wait for "about 5 minutes or more" after stopping
the engine to prevent burns and fire, after checking the cooling condition of
muffler and engine body fully.
1.6 Storage
1) For safety, please be sure to close the fuel cock.
2) When storing this machine for a long time, please keep it indoors.
3) Please remove dust and foreign matter attached to the main body and working part.
1.7 Warning display mark
1) Warning indication marks are carefully selected as important items among important
hazards within this item, and are affixed to the main unit.
Please fully understand and be sure to observe it.
- 9 -
1. ご使⽤の前に
Advertisement
