Advertisement
4.3 Loading and unloading , Transportation.
1) Always stop the engine and keep the fuel cock in the "closed" state when transporting
the machine. Fuel leaks can cause spilled fuel to catch fire.
2) Also, do not tilt the Machine more than necessary. Fuel may leak out.。
warning
1) Be sure to use the bridge. Loading and unloading this product (using a UNIC vehicle,
etc.) not only causes problems such as frame deformation, but it is also dangerous
because it may fall. Please do not do it.
2) Do not stop in the middle of the bridge. Especially in the case of a rear load, the front
wheels may rise when restarting, which is dangerous. Please load and unload all at once
at low speed.
3) Please use a truck without a ceiling (hood) for the truck. When loading and unloading,
there is a risk of collision with workers depending on the height of the ceiling.
4) Choose a flat and stable location and do not operate it on public roads.
5) Use a truck that can be fit for the total weight of this product and the total weight of the
driver.
6) To prevent accidents when working with multiple people, setting the signal with the
truck driver.
7) Loading and unloading at night is dangerous. If it is unavoidable, select a place where
sufficient lighting can be obtained before performing the work. If it is difficult for the
operator to check the position between the bridge and the tires, there is a risk of falling.
8) Stop the engine on the truck, engage the parking brakes, and block the tires.
9) Be sure to set the cutting height adjustment lever to the "move" position. The blade may
touch the bridge and turn over it.
10) The diff-lock lever should be "ON" position on the bridge.
11) Be sure to hang the bridge hooks so that there are no steps on the truck bed.
12) Make sure that the left and right tires of this machine are in the center of the bridge.
13) The engine should be stopped on the Truck, the fuel cock should be "closed" and the
key removed. Use a rope that is strong enough to securely fasten this machine and
securely fasten it on the Truck.
- 29 -
7. 点検表
Advertisement
