Loading And Unloading; How To Do The Good Work - OREC RM983F 4WD Operation Manual

4.3.1 loading and unloading

① When loading, move forward, and when

unloading, move backward.

② Use the standard the bridge .

③ Put the differential lock lever in the "ON" position, the cutting height adjustment lever in

the "Move" position, and do not put it in any other position.

④ Move the throttle lever at the medium speed position.

Reference︔

Bridge Standard

Use a bridge that meets the standard and has sufficient strength.

●Length...Length is more than 3.5 times the height of the truck bed.

●Width...Width is fits the wheel width of this machine.

●Strength...Sufficient to withstand the weight of this machine and the total

warning

1) Continuing to work with grass clippings around the engine may cause a fire or engine

burning. Especially, frequently remove the grass debris accumulated around the

exhaust pipe that becomes hot. Also, regularly clean the inside of the engine cover as

well as the outside.

2) The cut grass is spit out from the Blade replacement cover on the right side of the

product, but foreign matter such as stone blocks, wire, and empty cans will scatter

from the entire circumference of the cutting section, which may cause damage to the

surrounding area. In the vicinity of buildings or in fields with many foreign substances,

remove these before work and do high mowing or keep them distane enough to

prevent people (especially children) and vehicles from entering the work place.

・Cutting height adjustment lever is

in "move" position

Diff lock lever is in the "on" position

- 30 -

7. 点検表

Table of Contents