Advertisement
4.2.3 How to operate the differential lock lever
Caution
Use the diff-lock lever only when loading and unloading, working on gentle slopes, or
when it is difficult to go straight due to one of the rear wheels spinning in a soft place
on the ground, and do not use it elsewhere.
not only will the inner tire be dragged during turning, the turning radius will increase,
but also tire parts will be overloaded and other parts of the body (especially the inside
of the mission) will be overloaded, causing malfunction.
Hook the diff-lock lever into the notch only in the above cases, and always return the diff-
lock lever to the "off" position in all other cases.
OFF
ON
diff-lock
Lever
4.2.4 How to move when it cannot run
Driving clutch Lever
warning
1) Always put the Driving clutch lever in the "ON" position except when pushing it without
Engine power.
2) For safety, be sure to press two people (operating and pushing).
3) Because it is a hydraulic 4WD, the front wheels are not going to neutral. (Only the rear
wheels are neutral.)
4) Do not move the Driving clutch lever to the "OFF" position on slopes.
It is very dangerous because it may cause slipping.
①
Normally leave it in the "off" position.
need a diff-lock on muddy or steep slopes, put the lever
in the "on" position, make a notch, and "lock".
② Be sure to return the diff-lock lever to the "OFF" position
after escaping from mud.
On a flat ground, setting the Driving clutch to the "OFF"
OFF
position makes it easier to push the Machine without
starting the engine.
This is used for engine troubles, etc.
If the diff-lock is used on a flat surface,
- 28 -
7. 点検表
Only if you
Advertisement
