Table of Contents
Advertisement
3. Pull the rear brake caliper body backward
out of the suspension position.
4. Remove the nut M12 x 1.25 of connecting
bolt between rear damper and flat fork
5. Loosen the flat fork shaft nut M14×1.5, pull
out the flat fork shaft from the right side and
pull out the flat fork backward.
entering the cylinder body reducing the
braking
performance.
removing the rear brake caliper body, if
it does not need to be replaced, do not
step on the rear brake pedal.
Warning:
Tighten the flat fork shaft fastening nut
to the specified torque of 75 ~ 85N.m.
Removal/installation of flat fork
And
after
Advertisement
Table of Contents
