Table of Contents
Advertisement
Combined rear position lamp
1. Outline drawing
2. Working principle
The combined rear position lamp integrates the functions of tail lamp and brake lamp.
The light of the tail lamp and brake lamp is red, the tail lamp/brake lamp bead is a double
filament bead, the low power bead is used for the tail lamp, and the high power bead is
used for the brake lamp.
3. Basic parameters
Rear position lamp bead specification: LED 2.7W;
Brake light bead specification: LED 3.1W.
4. Possible failures
Lamp bead failure;
Loose lamp holder;
Lamp line open circuit or short circuit;
Water or dust in the lamp;
Scratched or damaged lamp glass;
The reflection block falls off.
License plate signal lamp
1. Outline drawing
Advertisement
Table of Contents
