Table of Contents
Advertisement
Rear turn signal lamp
1. Outline drawing
2. Working principle
The rear turn signal lamp is composed of lamp glass, lamp shell, reflector, lamp holder,
handle and lamp bead. The light emitted by the lamp beads is reflected into concentrated
light by the reflector, and then scattered into uniform and soft orange light by the lamp
glass.
3. Basic parameters
Specification of front turn signal lamp bead: LED 2W.
4. Possible failures
Lamp bead failure;
Loose lamp holder;
Lamp line open circuit or short circuit;
Water or dust in the lamp;
Scratched or damaged lamp glass;
Loose or broken handle.
Flasher
1. Outline drawing
Advertisement
Table of Contents
