Table of Contents
Advertisement
Fine
adjustment:
Pull
to
open
the
protective rubber sleeve, loosen the lock
nut A, and turn the adjusting screw to
adjust to a suitable free stroke. Then
tighten the lock nut A and install the
protective rubber sleeve.
Lock nut A
Rough adjustment: If the fine adjustment
can not be in place, separate the throttle
control line from the throttle body, loosen
the lock nut B, and adjust the larger stroke
range. After adjustment, tighten the lock
nut B.
Check whether the throttle can rotate
smoothly from full open to full close in any
position. If there is hysteresis, adjust or
replace it.
Lock nut B
Advertisement
Table of Contents
