Table of Contents
Advertisement
Important torque figures
Front axle
Handlebar fixing bolt
Fixing bolts of upper and
lower connecting plates
Troubleshooting
Unstable direction
1. The bearing of riser is damaged;
2. Insufficient tire pressure;
3. Tire is damaged;
4. The wheel bearing is damaged.
5. The adjusting nut of riser is too tight.
Steer to one side or not in a straight line
1. The adjustment of left and right shock
absorbers is uneven;
2. The front fork is bent;
3. The front axle is bent and the wheel is
not installed correctly;
4. The wheel bearing is damaged;
Front wheel runout
1. Deformation of wheel rim
2. Wear of wheel bearing
75～85 N.m
Fastening bolts of
front
21～25 N.m
absorber plate
28～32 N.m
Front fork riser nut
Fastening screw of
brake disc
Difficulty in turning the wheel.
1. The wheel bearing and axle sleeve are
damaged
2. The tire pressure is not enough.
3. The brake disc does not reset.
Suspension is too soft
1. The elasticity of the front fork spring is
not enough;
2. The hydraulic oil level is too low or the
fluid type is wrong.
The suspension is too hard
1. The hydraulic oil level is too high or the
fluid type is wrong.
2. Bending of front shock absorption fork
tube
3. The front shock absorber is blocked.
20～25 N.m
shock
60～70 N.m
28～32 N.m
Advertisement
Table of Contents
