Table of Contents
Advertisement
Disassembly steps and diagrams of oil pump;
Installation steps of oil pump;
Disassembly and assembly of oil pump.
Disassembly steps and diagram of oil pump:
1. Separate the clutch control line from the
clutch control arm;
3. Remove the oil pump bolts, the driven
gear of the oil pump and the oil pump.
Disassembly and assembly of oil pump
2. Remove the right crankcase cover;
Installation steps of oil pump:
The installation procedure is reverse to the
disassembly
procedures.
installation, pay attention to the following
points:
1. The parts are clean and intact;
2. After installing the right crankcase cover,
the angle position of the clutch control arm
may change, so it shall be readjusted to
adapt to the adjustment of the clutch
operation line;
3. After everything is done, don't forget to
fill up the coolant and oil
Sequence
Procedure
Screw for oil
1
filter cover
2
Oil filter cover
3
Seal washer
During
Quantity
Remark
3
Use thread
1
sealant during
assembly
1
Advertisement
Table of Contents
