Table of Contents
Advertisement
the adjusting screw clockwise to adjust the light to move down and vice versa.
Left and right adjustment: the car can not be adjusted left and right.
Headlamp relay
1. Outline drawing
2. Working principle
There are two purposes to set the headlamp relay in the control of the headlamp: when
the engine is not started, the headlamp will not light up, and after the engine is started,
the headlamp will light up through the headlamp switch. 1) After riding at night, the
headlamp switch is on. When using the vehicle in the daytime, you forget to turn off the
switch. This function can not light up the headlamp when the engine is not started. 2)
another purpose is to extend the service life of the battery.
3. Possible failures
The high beam lamp cannot be turned on;
The low beam lamp cannot be turned on;
The headlamp is on by mistake;
The headlamp cannot be turned on after starting;
Short circuit or open circuit of outgoing line.
Advertisement
Table of Contents
