Table of Contents
Advertisement
of the lower shroud assembly.
3. Remove 2 connecting screws, M8× 30
inner hexagon screw, between muffler and
engine exhaust port. Remove 2 connecting
bolts, M8× 45 inner hexagon bolt, between
the rear silencer and the frame. Remove
the muffler.
Disassembly / installation of rear tail lamp
1. Unscrew 4
M6 × 16 inner hexagon
socket step screws from the fixing screws
of the cover plate. Remove the cover plate.
4. Remove 5 connecting cap screws, 2
M6×16 inner hexagon socket step cap
screws, 2 M6×12 hexagon socket step cap
screws and 1 M8×16 inner hexagon socket
bolt between the left and right body covers
and frame. Unplug the taillight, tail lamp
assembly connector and remove the left
and right car body covers and taillight and
the tail lamp assembly.
Advertisement
Table of Contents
