Table of Contents
Advertisement
specified pressure range for 6 seconds, it
can be used
Note:
When installing the cap on the detector,
first coat the sealing surface with water.
Valve opening pressure of radiator cap:
73.5 ～ 103 kPa
Radiator
Disassembly of radiator
1. Park the motorcycle on flat ground and
remove the radiator cover.
3. Pull out the radiator outlet pipe and drain
the coolant
5. Remove the fixing bolts of the radiator
and remove the radiator.
Specified pressure: 73.5-103 kPa.
Confirm
whether
connecting parts are leaking.
Do not increase the pressure above the
specified pressure, which may cause
damage
to
the
connecting parts
2. Loosen the hoop and pull out the water
pipe.
4. Unplug the temperature control switch
connector and fan power cord.
the pipe
and
the
radiator
and
other
Advertisement
Table of Contents
