Table of Contents
Advertisement
If the tire pressure does not meet the
specified requirements, check the tire for
cuts, embedded nails or other sharp
objects.
Remove the clutch operating line
Adjust the length
Adjust clutch operating line
Drive chain
Inspection of drive chain tension
Support the motorcycle on the flat ground
with the side bracket and set the
transmission in the neutral position. Check
1 Adjust nut, 2 Lock nut
Chain adjuster adjusting nut
Note:
The marking on the chain adjusters on
both sides must be consistent.
Warning:
The rear axle nut must be tightened
with a tightening torque of 75~85 Nm.
Cleaning and inspection of chain
Clean the drive chain with cleaning fluid to
remove dust and soil, and then air dry to
check whether the chain is worn or broken.
Advertisement
Table of Contents
