Table of Contents
Advertisement
the tail of the new chain tensioner, rotate to
make the front end of the tensioner retract
and lock, replace with a new seal washer,
install a new chain tensioner and fasten it.
Pull out the lock key of the tensioner to
tighten the timing chain.
Replace with a new sealing washer and
install the screw at the end of the chain
tensioner.
Note:
When the timing chain is in a relaxing state,
do not rotate the crankshaft, so as to avoid
wrong timing gear.
Chain tensioner
Air filter
Cleaning and replacement of air filter element
1. Open and remove the seat cushion with the key
2. Loosen the fastening screws of the air filter housing
Notes:
1. Remove the filter element and
check whether the filter element is normal.
The filter element is a paper filter element,
and the dirt on the surface can be cleaned
by compressed air; If the filter element is
too dirty, broken or damaged, it shall be
replaced;
2. When driving in dusty areas, the
cycle of cleaning and replacing the air filter
element shall be shortened;
3. Keeping the air filter clean can
improve the working efficiency of the
engine and prolong the service life of the
engine.
After cleaning or replacing the filter
element, assemble the whole vehicle in
reverse order.
Advertisement
Table of Contents
