Installing An I/O Adapter Board - Matrox Helios Series Installation And Hardware Reference

28 Chapter 2: Hardware installation
A B
Matrox Helios eCL/XCL
5. Connect Cable A to the B pin-pair of the system reset connector of Matrox Helios.
C
D
Matrox Helios eA/XA
6. Connect Cable B to the A pin-pair of the system reset connector of the Matrox
Helios.

Installing an I/O adapter board

To install the I/O adapter board of Matrox Helios eCL/XCL, Matrox
Helios eA/XA, or Matrox Helios eD/XD, proceed with the following steps.
1. Make sure that your Matrox Helios eCL/XCL, Matrox Helios eA/XA, or
Matrox eD/XD board is fastened to the computer chassis.
D C B A
A B C
Matrox Helios eD/XD
D