Connectors On Matrox Helios Ea/Xa - Matrox Helios Series Installation And Hardware Reference

To build your own cable, parts can be purchased from:
Manufacturer
Crimp-to-wire receptacle
Housing

Connectors on Matrox Helios eA/XA

The Matrox Helios eA/XA board has several interface connectors. On its bracket,
there are two analog video input connectors (DVI type). On the top edge of the
board, there is an internal auxiliary I/O connector and a system reset connector.
On the bracket of the cable adapter board, there are two external auxiliary I/O
connectors (HD-44 and DB-9); these allow you to access the signals of the internal
auxiliary I/O connector from outside the computer enclosure.
The following illustrates Matrox Helios eA/XA and an adapter board:
System reset
connector
Internal
Auxiliary I/O
connector
Analog
Video Input
Connector #1
Connector #0
Note that acquisition path is abbreviated as acq. path in this section.
Connectors on Matrox Helios eA/XA
FCI
76357-301 (discrete contact; wire size: 22-30 AWG)
65039-035 (2 positions)
External
Auxiliary I/O
Connector #0
Connector #1
127