Connectors On Matrox Helios Ed/Xd - Matrox Helios Series Installation And Hardware Reference

To build your own cable, parts can be purchased from:
Manufacturer
Crimp-to-wire receptacle
Housing

Connectors on Matrox Helios eD/XD

Matrox Helios eD/XD has several interface connectors. On its bracket, there is a
digital video input connector (for acquisition paths 0 and 1). On its top edge,
there is an internal digital video input connector (for acquisition paths 2 and 3),
an internal auxiliary I/O connector, and a system reset connector.
On the bracket of one of the cable adapter boards, there is digital video input
connector to access the signals of the internal digital video input connector from
outside the computer enclosure. On the bracket of the other cable adapter board,
there are two external auxiliary I/O connectors (HD-44 and DB-9); these allow
you to access the signals of the internal auxiliary I/O connector from outside the
computer enclosure.
The following illustrates Matrox Helios eD/XD with the two cable adapter boards:
Internal auxiliary I/O connector
Internal digital video
input connector
(acq. path 2 & 3)
Digital video
input connector 0
(acq. path 0 & 1)
Note that acquisition path is abbreviated as acq. path in this section.
Connectors on Matrox Helios eD/XD
FCI
76357-301 (discrete contact; wire size: 22-30 AWG)
65039-035 (2 positions)
Digital video input connector 1
(acq. path 2 & 3)
External auxiliary I/O
connector #0
connector #1
139