Connectors On Matrox Helios Ecl/Xcl - Matrox Helios Series Installation And Hardware Reference

Connectors on Matrox Helios eCL/XCL

The Matrox Helios eCL/XCL board has several interface connectors. On its
bracket, there are two Camera Link video input connectors. On the top edge of
the board, there is an internal auxiliary I/O connector and a system reset
connector
On the bracket of the cable adapter board, there are two external auxiliary I/O
connectors (HD-44 and DB-9); these allow you to access the signals of the internal
auxiliary I/O connector from outside the computer enclosure.
The following illustrates Matrox Helios eCL/XCL and an adapter board:
Internal
Auxiliary I/O
connector
System reset
connector
Camera Link
Video Input
Connector #0
Connector #1
Note that acquisition path is abbreviated as acq. path in this section.
1. Starting from revision 1 of the Matrox Helios XCL PCB.
1
.
Connectors on Matrox Helios eCL/XCL
External
Auxiliary I/O
Connector #0
Connector #1
117