Matrox Helios Series Installation And Hardware Reference page 119

Pin Signal Description
10 X2+ Video input data X2 (positive).
11 X1+ Video input data X1 (positive).
12 X0+ Video input data X0 (positive).
13 Inner shield Ground.
Pin Signal Description
1 Inner shield Ground.
2 Z3+ Video input data Z3 (positive).
3 Zclk+ Clock input Z (positive).
4 Z2+ Video input data Z2 (positive).
5 Z1+ Video input data Z1 (positive).
6 Z0+ Video input data Z0 (positive).
7 TERMINATED 100 Ohm termination between pins 7 and 20.
8 Y3+ Video input data Y3 (positive).
9 Yclk+ Clock input Y (positive).
10 Y2+ Video input data Y2 (positive).
11 Y1+ Video input data Y1 (positive).
12 Y0+ Video input data Y0 (positive).
13 Inner shield Ground.
For the single-Full version, connector #0 has the same pinout as the one in the
previous table. For connector #1, the pinout is listed in the following table. You
can only attach one video source to these connectors (or two RGB genlocked video
sources); see Matrox Helios hardware reference for more details.
To interface with the above connectors, use a standard Camera Link cable. You
can purchase such a cable from your video source manufacturer, 3M Interconnect
Solutions for Factory Automation, Intercon 1, or other third parties. Note that
this cable is not available from Matrox.
❖ If using both Camera Link connectors on the single-Full version of the board, the
cables you choose must be of the same type and length. Otherwise, the cables can
have different propagation delays.
Connectors on Matrox Helios eCL/XCL
Pin Signal Description
23 X2- Video input data X2 (negative).
24 X1- Video input data X1 (negative).
25 X0- Video input data X0 (negative).
26 Inner shield Ground.
Pin Signal Description
14 Inner shield Ground.
15 Z3- Video input data Z3 (negative).
16 Zclk- Clock input Z (negative).
17 Z2- Video input data Z2 (negative).
18 Z1- Video input data Z1 (negative).
19 Z0- Video input data Z0 (negative).
20 TERMINATED 100 Ohm termination between pins 7 and 20.
21 Y3- Video input data Y3 (negative).
22 Yclk- Clock input Y (negative).
23 Y2- Video input data Y2 (negative).
24 Y1- Video input data Y1 (negative).
25 Y0- Video input data Y0 (negative).
26 Inner shield Ground.
119