Dual-Base Version - Matrox Helios Series Installation And Hardware Reference

Dual-Base version

The dual-Base version supports simultaneous acquisition from two video sources,
for a maximum of 24 bits of video data from each. When acquiring from
time-multiplexed video sources, a maximum of 32 bits of video data is supported
from each. The video sources can be frame, field, or line-scan video sources. Note
that the acquisition paths are completely independent, and therefore the video
sources do not need to be identical.
Second
MDR-26
Cam Ctrl (4)
connector
First
Cam Ctrl (4)
MDR-26
connector
HSYNC Out (2)
VSYNC Out (2)
Clock Out (2)
DB-44 and
DB-9
2
connectors
OptoAux(4)
1.
28 bits serialized across 4 LVDS pairs.
On a separate bracket.
2.
3.
Refer to the "Synchronization and control signals" section for details.
Matrox Helios eCL/XCL acquisition section
UART
SerTFG
LVDS driver
& receiver
SerTC
LVDS
drivers
Clock
ChannelLink
Data (24)
Receiver #2
1
& Syncs (4)
Data (24)
1
& Syncs (4)
ChannelLink
Receiver #1
Clock
LVDS
drivers
SerTFG
LVDS driver
& receiver
SerTC
UART
LVDS
drivers
and
3
Aux In(4)
receivers
3
Aux Out(4)
3
Aux I/O(6) TTL buffers
Opto-coupler
PSG #1
32
LUTs
24
24
32
LUTs
PSG #0
Acquisition section of
Matrox Helios eCL/XCL dual-Base
49
Video
to
PCI-X
Bridge