Adjustments - LEMKEN Saphir 8 AutoLoad Operating Instructions Manual

Adjustments

8 ADJUSTMENTS
 Read and follow the section entitled "Safety and protection
CAUTION  The implement may only be used, maintained and repaired by
 All adjustments and repair work, as well as the rectification of
Risk of accidents while making adjustments
During all adjustment work, there is a risk of crushing, cutting,
jamming and impacts to the hands, feet and body on heavy and -
DANGER
in part - spring-loaded and/or sharp-edge parts.
Adjustment work may be carried out by appropriately instructed
personnel only.
 Always wear appropriate protective clothing.
 Always observe the currently valid operational safety and acci-
measures.
people who are familiar with it and who are aware of the ha-
zards involved.
any malfunctions, is to be conducted when the drive has been
switched off and the engine is at a standstill only. Remove the
ignition key.
dent prevention regulations.
43