Agitator Shaft - LEMKEN Saphir 8 AutoLoad Operating Instructions Manual

Commissioning

5.3.1 Agitator shaft

2
4
 Read and observe the general safety information!
 Never reach into the hopper during travel!
 Never move the machine with the protective cover open!
1
3
In the case of fine seeds such as en-
crusted rape, the agitator shaft (1) has to
be switched off. To do this, you remove the
linch pin (2) from the drive chain wheel (4)
after dismantling the protective cover (3)
and place it in the toolbox of the soil-
working implement.
Then replace the protective cover (3) and
secure into place.
29