Section Width Control; Switching Off The Section Widths - LEMKEN Saphir 8 AutoLoad Operating Instructions Manual

9.4

Section width control

9.4.1 Switching off the section widths

5
2
7
6
66
1
3
4
5
If, for example, you want to work with half
of the machine's width at the start of a
field, you can switch off the right-hand sec-
tion as follows:
 Remove linch pin (1).
 Remove linch pin (2), remove the pull
grip (3) from the holder (4), place onto
the outer right of the sowing shaft (5),
and secure with linch pin (2).
2
3
 Pull out the sowing shaft (5) until the
coupling (6) is disengaged and is right
next to the seed wheel (7).
Operation