Configuring blending settings for multiple projectors
Combine several projected images into one single, seamless image with edge blending, for multiple
projectors.
1. In the Blending Settings dialog, select a resolution.
2. Click Next.
3. In the Overlap tab, select a layout.
4. To change the percentage of the horizontal overlap, use the Horizontal Overlap slider or enter
a pixel value.
5. To change the percentage of the vertical overlap, use the Vertical Overlap slider or enter a
pixel value.
6. Click Next.
7. In the Network tab, to select the projector you want to control, click on the box.
8. In the IP Address field, type the IP address of the projector.
9. To apply the change, click Apply
10. .For the remaining projectors, repeat steps 7 to 9.
H Series, HS Series, GS Series (700, 850) Warping and Blending User Manual
020-000807-02 Rev. 1 (07-2016)
Copyright
2016 Christie Digital Systems USA Inc. All rights reserved.
©
Warping and blending
10