Electrical Supply; Operator Accessible Areas; Cleaning Your Product - Xerox WorkCentre C226 System Administration Manual

Electrical Supply

This product shall be operated from the type of electrical supply indicted on the product 's data plate label. If
you are not sure that your electrical supply meets the requirements, please consult your local power
company for advice.
WARNING
This product must be connected to a protective earth circuit.
This product is supplied with a plug that has a protective earth pin. This plug will fit only into an earthed
electrical outlet. This is a safety feature. To avoid risk of electric shock, contact your electrician to replace
the electrical outlet if you are unable to insert the plug into it. Never use an earthed adapter plug to connect
the product to an electrical outlet that lacks an earth connection terminal.

Operator Accessible Areas

This equipment has been designed to restrict operator access to safe areas only. Operator access to
hazardous areas is restricted with covers or guards, which would require a tool to remove. Never remove
these covers or guards.
Maintenance
Any operator product maintenance procedures will be described in the user documentation supplied with the
product. Do not to carry out any maintenance on this product, which is not described in the customer
documentation.

Cleaning Your Product

Before cleaning this product, unplug the product from the electrical outlet. Always use materials specifically
designated for this product, the use of other materials may result in poor performance and may create a
hazardous situation. Do not use aerosol cleaners, they may be explosive and flammable under certain
circumstances.
x Xerox WorkCentre C226 System Administration Guide