Xerox WorkCentre C226 System Administration Manual page 132

Scan Kit
Item
Primary SMTP Server
Secondary SMTP Server
Port Number
Timeout [seconds]
Reply E-mail Address
Time Zone
SMTP Authentication
5-8
To configure your e-mail server and DNS server settings, click "SMTP Setup" or "DNS
Setup" in the Network Scanning Setup screen (see "Network Scanning Setup screen"
on page 5-6), or click "Services" in the menu frame.
When you have completed all of the entries, click "Submit". The entries will be stored.
Click here.
SMTP Setup
Enter an IP address for the primary e-mail server or a host name*. (If you will be
using Scan to E-mail, be sure to enter this information.)
Enter an IP address for the secondary e-mail server or a host name. No need to
enter if a secondary e-mail server is not set up.
Enter a Port Number for SMTP.
The default is 25.
Enter a time out period, from 0-60 seconds, that the system will wait for as it
attempts to connect to the primary server. The default is 20 seconds. If no con-
nection is made, the system will then look for the secondary server if it has been
set up. If not, the system will stop attempting to connect.
Enter an e-mail address to which the machine returns an unsuccessful delivery
message when the distribution has failed. Only 1 e-mail address can be
entered. The entered e-mail address is also used for the sender e-mail address.
Select the time zone of the place to use this Network Scanning System. A spe-
cific time zone is set after the selection.
Select this checkbox if an SMTP server that authenticates users during SMTP
authentication will be used. After selecting the checkbox, the User Name and
Password text boxes under the checkbox are enabled. Enter the information
necessary for authentication in these text boxes.
Description
Xerox WorkCentre C226 System Administration Guide