Xerox WorkCentre C226 System Administration Manual page 179

Xerox WorkCentre C226 System Administration Guide
3. Touch the key for the desired polling times.
If you do not wish to erase the document after polling takes place, touch the
[UNLIMITED] key so that it is highlighted.
F-Code Memory Box / Polling Memory
No.001
Polling Times
Once
Unlimited
4. Touch the [OK] key.
You will return to the screen of step 2 and the selected polling times will appear.
5. To exit, touch the [EXIT] key.
To program another memory box, touch the [NEXT] key.
Next Exit
Programming, Editing, and Deleting F-Code Memory Boxes
Next Exit
Ok
Touching the [EXIT] key returns you to the screen of
step 3 on page 6-30.
Touching the [NEXT] key returns you to the screen for
programming a new memory box (the screen of step 4
on page 6-30).
6-33