Activity Report Print Select Setting; Default Exposure Settings - Xerox WorkCentre C226 System Administration Manual

Fax Unit
NOTES:
6-54

Activity report print select setting

This program is used to have the activity report stored in the machine's memory
printed out at regular intervals.
You can choose to have the report automatically printed each time the number of
stored transactions exceeds 50, or have the report printed at a specified time every
day (only once per day).
The report is normally set to not print out. Select "AUTO PRINT AT MEMORY FULL"
to have the report automatically printed when the number of stored transactions (the
combined total of transmissions and receptions) exceeds 50.
If you select the "PRINT DAILY AT DESIGNATED TIME" checkbox, "HOUR" and
"MINUTE" keys will appear to the right to let you specify the time.
Key Operator Programs
Activity Report Print Select Setting
Auto Print At Memory Full
Print Daily At Designated Time
Touch the "HOUR" and "MINUTE" keys and then set the hour by touching the
keys. Set the minute in the same way. When finished, touch the [OK] key.
• If you only select the "PRINT DAILY AT DESIGNATED TIME" setting and the
number of recorded transactions exceeds 50 before the specified time, each new
transaction will delete the oldest transaction (the oldest transaction will not be
printed).
• The activity report can also be printed out manually (see "Printing Out Settings" on
page 6-63).

Default exposure settings

This program is used to set the default exposure level for scanning originals in fax /
image send mode.
This program is initially set to "AUTO". If changed to "MANUAL", the exposure level
can be adjusted to five levels. Level 1 is the lightest level and level 5 is the darkest
level.
Ok
Hour Minute
13 01
Xerox WorkCentre C226 System Administration Guide
and