Installation Method 4 - Xerox WorkCentre C226 System Administration Manual

Installation method 3
NOTE:
Xerox WorkCentre C226 System Administration Guide
Use this procedure to install the software in the following environments:
• The printer is connected by USB cable.
• Windows version: Windows 98/Me/2000
To install the software using the installer, you must have administrator's rights.
Installing the software in Windows 98/Me or Windows 2000 (USB/
interface)
Install the software as follows.
Before starting the installation, make sure the USB interface cable is not connected to
the machine.
The procedure for installing the printer driver is explained here using Windows Me as
an example.
1. Insert the WorkCentre C226 PostScript Drivers CD-ROM that accompanied the
machine into your CD-ROM drive.
2. Double-click [My Computer], and then double-click the CD-ROM icon.
3. Double-click the [SETUP] icon.
4. The Licence Agreement window will appear. Make sure that you understand the
contents of the licence agreement, and then click the [Yes] button.
5. After confirming the message in the "Welcome" window, click the [Next] button.
6. Follow the on-screen instructions.
7. Click the [Printer Driver] button.
To view detailed information on the software, click the [Display Readme] button.
8. Click the [Next] button.
Requirements for Windows
3-13