Setting For F-Code Confidential Transmission Memory Boxes (Print Pin) - Xerox WorkCentre C226 System Administration Manual

Fax Unit
Setting for F-Code Confidential Transmission Memory Boxes
(Print PIN)
NOTES:
6-34
Program the print PIN (Personal Identification Number) that is used to print a docu-
ment that has been received to an F-code confidential memory box. For information on
using a print PIN, refer to the "Fax Unit" section in the WorkCentre C226 User Guide.
• Program a 4-digit number for the print PIN. The characters "
be used.
• The print PIN can not be omitted.
• Take care not to forget the print PIN that you have programmed. If you forget the
passcode, consult your dealer.
1. Touch the [CONFIDENTIAL] key in step 3 of "Programming an F-Code Memory
Box" on page 6-29 and store a box name, sub-address, and passcode.
2. Touch the [PRINT PIN] key.
Fax Information
Box Name
Sub Address
55112233/481221
Print Pin
3. Use the numeric keys to enter a 4-digit number.
F-Code Memory Box / Confidential
No.003
Print Pin
Enter The Print Pin Via The 10-Key Pad,Then Press [Ok].
• If you make a mistake, press the [C] key. All digits will be cleared, so you will
need to re-enter the number from the first digit.
• To cancel entry of the print PIN, touch the [CANCEL] key. You will return to the
screen of step 2 without programming a print PIN.
Next Exit
Cancel Ok
Xerox WorkCentre C226 System Administration Guide
" and "#" cannot