Operational Safety Information; Electrical Supply - Xerox ColorQube 9303 User Manual

Hide thumbs Also See for ColorQube 9303:
Table of Contents

Advertisement

Operational Safety Information

Operational Safety Information

Your Xerox equipment and supplies have been designed and tested to meet strict safety requirements.
These include safety agency examination, approval, and compliance with established environmental
standards.
To ensure the continued safe operation of your Xerox equipment, follow these safety guidelines at all
times:

Electrical Supply

This section provides important electrical supply safety information that you should read before
installing or using the device.
Read the information in the following sections:
Power Outlet Electrical Safety
Power Cord Electrical Safety
Equipment Safety
Emergency Power Off
Disconnect Device
Power Outlet Electrical Safety
This equipment must be operated from the type of electrical supply indicated on the data plate label
located on the rear cover of the equipment. If you are not sure that your electrical supply meets the
requirements, please consult your local power company or a licensed electrician for advice.
The electrical supply outlet should be installed near the equipment and should be easily accessible.
WARNING:
This equipment must be connected to a protective earth circuit. This equipment is
supplied with a plug that has a protective earth pin. This plug will only fit into an earthed electrical
outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact a
licensed electrician to replace the outlet. Always connect equipment to a correctly grounded
power outlet. If in doubt, have the outlet checked by a qualified electrician.
Improper connection of the equipment-grounding conductor can result in electrical shock.
Power Cord Electrical Safety
Use only the power cord supplied with this equipment.
Plug the power cord directly into a grounded electrical outlet. Do not use an extension cord. If you
do not know whether or not an outlet is grounded, consult a qualified electrician.
Do not place this equipment where people might step on or trip on the power cord.
330
ColorQube™ 9301/9302/9303
Safety and Regulations
on page 330.
on page 330.
on page 331.
on page 332.
on page 332.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Colorqube 9301Colorqube 9302

Table of Contents