Xerox WorkCentre C226 System Administration Manual page 113

Xerox WorkCentre C226 System Administration Guide
Mac OS 8.6 - 9.2.2
1. Select [Chooser] from the Apple Menu.
2. Click the [LaserWriter 8] icon.
• The model name of your network-connected machine appears in the "Select a
PostScript Printer" list on the right.
The name of the machine that appears is the name that was entered in the
AppleTalk settings when the network settings were configured ("xxxxxx" is a
sequence of characters that varies depending on your machine).
• If multiple AppleTalk zones are displayed, select the zone which includes the
printer.
3. Click the machine's model name in the "Select a PostScript Printer" list.
4. Click the [Create] button.
If the "Select a PostScript™ Printer Description File" dialog box appears, select
the PPD file of the machine, and then click the [Select] button.
If the "Select a PostScript™ Printer Description File" dialog box does not appear,
follow these steps to select the PPD file manually when you return to the Chooser
dialog box.
1) Verify that the machine is selected in the "Select a PostScript Printer" list, and
then click the [Setup] button and the [Select PPD] button.
2) Select the PPD file of the machine, and then click the [Open] (or [Select])
button.
3) Click the [OK] button.
5. Verify that the machine is selected in the "Select a PostScript Printer" list, and then
click the [Setup] button and the [Configure] button.
6. Set the printer configuration based on the options that have been installed, and
then click the [OK] button.
7. Click the [OK] button to close the dialog box.
8. Click the Close box to close the Chooser.
This completes the configuration of the printer driver.
Requirements for Macintosh
3-27