Installation Method 1 - Xerox WorkCentre C226 System Administration Manual

Installation method 1

Xerox WorkCentre C226 System Administration Guide
Installation of the printer driver using the "Add printer wizard"
Installation of the printer driver using the "Add printer wizard" is performed using basic
Windows procedures.
To install the printer driver by this method, see page 3-18.
In case of upgrading the version of currently installed printer driver, delete the currently
installed printer driver first and then install the new printer driver.
To uninstall the printer driver, see page 3-18.
About network environments
There are several types of network environments. The explanations in this manual
assume that your operating system is Windows and that TCP/IP protocol is used in
your network environment.
Use this procedure to install the software in the following environments:
• Printer connected by LAN cable
• Windows version: Windows 95/98/Me/NT4.0/2000/XP/Server 2003
The following procedure uses Windows XP as an example. Follow the same steps to
install the software on other operating systems.
Before installing the software, make sure that the machine is connected to the network
with a network cable.
About network environments
There are several types of network environments. Typical environments include the
following:
• Windows network environment
• NetWare network environment
• UNIX network environment
• Macintosh network environment
This manual explains peer-to-peer and server-client network connections in a Win-
dows environment.
Requirements for Windows
3-3