Xerox WorkCentre C226 System Administration Manual page 95

NOTE:
NOTE:
NOTE:
Xerox WorkCentre C226 System Administration Guide
14. When you are asked if you wish to install the display font, select an answer and
click the [Next] button.
15. Check the contents of the window and click the [Next] button.
Installation of the printer driver begins.
When you are using Windows 2000/XP/Server 2003
If a warning message regarding the Windows logo test or digital signature appears, be
sure to click the [Continue Anyway] or [Yes] button.
16. When the finish setup window appears, click the [OK] button.
17. Click the [Close] button.
A message prompting you to restart your computer may appear after installation is
finished. If this message appears, click [Yes] to restart your computer.
This completes the installation.
Using the machine as a shared printer via a server
If the printer server in a Windows NT server environment, NetWare server environ-
ment, or other environment is configured to share the printer (the machine), follow the
steps below to install the printer driver in each client computer.
Ask your network administrator for the server name and printer name of the machine
on the network.
The "printer server" explained here is a computer that is connected to the machine,
and "clients" are other computers connected to the same network as the printer server.
1. Perform steps 1 through 8 of "Installing the printer driver (custom installation)" on
page 3-7.
2. Select the [Shared Printer] and click the [Next] button.
Requirements for Windows
3-9