Xerox WorkCentre C226 System Administration Manual page 160

Fax Unit
n Press [Ok].
NOTE:
6-14
10. If you need to enter a sub-address, touch the [SUB ADDRESS] key and then enter
the sub-address with the numeric keys.
Cancel Ok
Pause
Sub Address
11. If you wish to enter a passcode, touch the [SUB ADDRESS] key once again and
enter the passcode with the numeric keys.
No. Via The 10-Key Pad, Then Press [Ok
0666211221/3456/
12. Touch the [OK] key.
You will return to the one-touch key programming screen. "REGISTRATION IS
COMPLETED" will appear highlighted to the right of "No.".
The "FAX No." line only shows 32 digits, regardless of how many digits actually
programmed.
When you touch the [SUB ADDRESS] key, a slash is
entered after the fax number. Continue by entering the
sub-address (max. 20 digits).
If you do not wish to enter a passcode, proceed to step
12.
When you touch the [SUB ADDRESS] key, a slash is
entered after the sub-address. Continue by entering the
passcode (max. 20 digits).
Xerox WorkCentre C226 System Administration Guide