Selecting The Starting Rate; Setting Up Book Faxing; Requesting A Confirmation Report - Xerox WorkCentre WC7530 User Manual

Faxing

Setting Up Book Faxing

You can determine the method used for scanning images in a book.
To select Book Faxing:
1. Touch the Layout Adjustment tab, then touch Book Faxing.
2. Touch one of the following options:

Off is the default setting.

Both Pages scans both pages of the book. If necessary, touch the Binding Edge Erase arrows to
set the amount to erase from the binding edge.

Left Page Only scans the left page of the book. If necessary, touch the Binding Edge Erase
arrows to set the amount to erase from the binding edge.

Right Page Only scans the right page of the book. If necessary, touch the Binding Edge Erase
arrows to set the amount to erase from the binding edge.
Touch Save.
3.

Requesting a Confirmation Report

You can request a report that confirms when your faxes are sent or received. The report contains
information on timeouts, busy signals, and retry failures.
To set up a Confirmation Report:
1. Touch the Fax Options tab, then touch Confirmation Report.
2. Touch one of the following options:

Always Print generates a report for all fax jobs.

Print on Error Only only generates a report for fax jobs that fail to send.
3. Touch Save.

Selecting the Starting Rate

Select the highest starting rate unless the destination for the fax you are sending has special
requirements.
To select the transmission speed for a fax:
1. Touch the Fax Options tab, then touch Starting Rate.
2. Touch one of the following options:

Super G3 (33.6 Kbps)

G3 (14.4 Kbps)

Forced (4800 bps)
3. Touch Save.
Sending a Delayed Fax
You can set a time in the future for the printer to send your fax job. The time delay can be from 15
minutes to 24 hours from the current time.
138 WorkCentre 7500 Series Multifunction Printer
User Guide