Oat Interface; Gps Navigator Interface - uAvionix AV-30-E Installation Manual

13.2.5

OAT Interface

If an Outside Air Temperature (OAT) probe is connected, utilize the
display customization guidance provided in the Pilots Guide to configure
the display to show OAT in at least one textual display field.
Note that OAT calibration is performed in the Setup procedures. This
step only ensures that the OAT probe is detected properly.
13.2.6

GPS Navigator Interface

If a GPS Navigator is connected, utilize the display customization
guidance provided in the Pilot's Guide to configure the display to show
GPS navigational data in at least one textual display field.
The image below shows a typical configuration that the pilot may setup.
UAV-1004234-001, AV-30-E Installation Manual
Rev H
Figure 52 – OAT Indicator
Figure 53 – GPS Data Elements
119