Serial Inputs - uAvionix AV-30-E Installation Manual

Set the TAS units to owner / pilot preference.
Set the Baro units to match that of the existing altimeter.
Set OAT units to owner / pilot preference.
13.1.8

Serial Inputs

GPS NAV SRC
Multiple serial ports support GPS sources. Set to the serial port on which
your GPS source is installed.
SERIAL 1
This serial port corresponds to DB-15 pin 2 and 3. Set according to the
type of the installed GPS navigator on this port.
Most handheld GPS navigators produce output in NMEA format while
most panel-mounted navigators produce Aviation format.
A tailBeaconX can also supply GPS data. To use it as a GPS source
when BCNX GPS is selected, the tailBeaconX must share its serial
connection with a second AV-30. The second AV-30 must have SERIAL
2 set to BEACON X. See Figure 21 - Parallel tailBeaconX GPS
Connections for a diagram of the required connections and settings in
this configuration.
Value
NONE
AV 9600
NMEA 4800
UAV-1004234-001, AV-30-E Installation Manual
Rev H
Value GPS Source
NONE None available
SERIAL 1 Specified in SERIAL 1 setting
SERIAL 2 Specified in SERIAL 2 setting
Serial 1 Source
None available
Aviation format (9600 bps)
NMEA format (4800 bps)
106