uAvionix AV-30-E Installation Manual page 81

Input Set Vertical Speed (SVS)
• Subsequent to saving the SET ALT value, you should now be
presented with a 'SET VS' input. Inputting a Set Altitude is always
followed by inputting a Set Vertical Speed. If you do not get the
'SET VS' input prompt, go back to the installation menu and verify
that SERIAL 2 is set to AEROCRUZE or PRO PILOT.
• Turn the center knob to select a vertical speed
• Press and release the center knob to save the SVS value
UAV-1004234-001, AV-30-E Installation Manual
Rev H
81